Icom CI-V Receivers and their Features supported by RadioControl

Diese Seiten ist auch in Deutsch verfügbar.

Product Information

News
Overview
System Requirements
Supported Radios
Features in Detail
Editions
Feature Comparison

Additional Modules

AOR AR-ONE Driver
R&S EB200 Driver
4-Devices Monitor
8-Devices Monitor
COM Autom. Plug-in
CORBA Autom. Plug-in

Obtaining the product

Download Area
Download Trial Edition
List Prices

Other

About us
Support
Links

Supported Icom CI-V Receivers and their Features

The following table lists all receiver drivers that are included in the CI-V device driver and their supported radio features. In most cases the name of the driver corresponds to the name of the respective radio. Therefore you can also check if a specialized driver is available for a radio.

Radio/Driver	Supported VFO Attributes	Transmitted Data Fields of a RadioControl Memory File¹	Miscellaneous
Universal Driver	Frequency Step Mode Shift Signal Strength Squelch Status	none	Frequency range and modes are not accommodated to the radio Selection of the IF filter is not possible
IC-R10	Frequency Step Mode Shift Signal Strength Squelch Status	Memory channel up- and download is not supported by the radio	Support of all shipping versions
IC-R20	Frequency Step Mode Shift Signal Strength Squelch Status	Memory channel up- and download is not supported by the radio	Support of all shipping versions
IC-R71	Frequency Step Mode Shift Squelch Status⁴⁾	Frequency Mode	Support of all shipping versions Support of the IC-731/735 CI-V compatiblity mode Support of special memory channels, in addition to conventional memory channels IF filter should be selectable too, unfortunately no information is available
IC-R72	Frequency Step²⁾ Mode Shift Squelch Status	Frequency Mode Scan^{3) 5)}	Support of the IC-731/735 CI-V compatiblity mode Support of all shipping versions Support of special memory channels, in addition to conventional memory channels Deletion of memory channels Support of device-internal scanner for memory scan and frequency search operations⁸⁾ Memory channel "lock-out"-feature will be emulated by using selected memory scan. Scan resume condition must be set to ON in the radio, to ensure proper operation of the scanner. As that is the factory setting, no such action is normally required. IF filter should be selectable too, unfortunately no information is available
IC-R75	Volume Squelch Level Squelch Mute Antenna Switching Frequency Step²⁾ Mode Filter Shift ATT AGC Noise Blanker Signal Strength Squelch Status	Frequency Displaytext⁶⁾ Mode ATT Scan⁵⁾	Support of the IC-731/735 CI-V compatiblity mode Support of all shipping versions Automatic detection of optional IF filters Support of special memory channels, in addition to conventional memory channels Deletion of memory channels Support of device-internal scanner for memory scan and frequency search operations⁸⁾ Memory channel "lock-out"-feature will be emulated by using selected memory scan. Displaytext: For characters that are supported by the radio, take a look at footnote ⁶⁾
IC-R7000	Frequency Step Mode Filter Shift Squelch Status⁴⁾	Frequency Mode	Support of all shipping versions Support of special memory channels, in addition to conventional memory channels Deletion of memory channels
IC-R7100	Volume Mute Frequency Step²⁾ Mode Filter Shift ATT Signal Strength Squelch Status	Frequency Mode Step³⁾ Scan^{3) 5)}	Support of the IC-731/735 CI-V compatiblity mode Support of all shipping versions Support of special memory channels, in addition to conventional memory channels Support of device-internal scanner for memory scan and frequency search operations⁸⁾ Memory channel "lock-out"-feature will be emulated by using selected memory scan.
IC-R8500	Volume Squelch Level Squelch Mute Frequency Step²⁾ Mode Filter Shift ATT AGC Noise Blanker Signal Strength Squelch Status	Frequency Displaytext Mode Step Filter ATT Scan⁵⁾	Support of the IC-731/735 CI-V compatiblity mode Support of all shipping versions Editing of memory bank names Support of special memory channels, in addition to conventional memory channels Deletion of memory channels Support of device-internal scanner for memory scan and frequency search operations⁸⁾ Memory channel "lock-out"-feature will be emulated by using selected memory scan. Displaytext: The IC-R8500 supports the characters specified in footnote ⁷⁾ and the following characters ° and · in addition.
IC-R9000	Volume Squelch Level Squelch? Mute Frequency Step²⁾ Mode Filter Shift ATT Signal Strength Squelch Status	Frequency Mode Step³⁾ Scan^{3) 5)}	Support of the IC-731/735 CI-V compatiblity mode Support of all shipping versions Support of special memory channels, in addition to conventional memory channels Deletion of memory channels Support of device-internal scanner for memory scan and frequency search operations⁸⁾ Memory channel "lock-out"-feature will be emulated by using selected memory scan. Does the radio support the level (S-Meter) squelch?
IC-R9500	Volume Squelch Level Squelch Mute Antenna Switching Frequency Step²⁾ Mode Filter Shift ATT AGC AFC Noise Blanker CTCSS Signal Strength Squelch Status	Frequency Displaytext⁷⁾ Mode Step Filter Shift CTCSS ATT Scan⁵⁾	Support of all shipping versions Support of the device's native frequency shift function Support of special memory channels, in addition to conventional memory channels Deletion of memory channels Support of device-internal scanner for memory scan and frequency search operations⁸⁾ Memory channel "lock-out"-feature will be emulated by using selected memory scan.
IC-RX7	Frequency Step Mode Shift Signal Strength Squelch Status	Memory channel up- and download is not supported by the radio	Support of all shipping versions Support of the device's native 8.33 kHz airband step

________

¹⁾	The data fields specified in this column will be transferred from a RadioControl Memory File to the radio's memory when uploading channels and from radio's memory to the RadioControl Memory File when downloading channels. The device driver fills the data fields of a RadioControl Memory File, for which the radio does not provide a value, with default values when downloading memory channels from the radio.
²⁾	The step will be used in RadioControl and only transferred to the radio if its value is supported by the radio.
³⁾	when uploading memory channels to the radio only
⁴⁾	The squelch status has to be fed from the "Recorder Remote" jack of the radio to the CTS, DSR, RING or CD (aka RLSD) pin of the serial port by additional hardware.
⁵⁾	sets the (Scan-)Select-flag of the radio internal memory channel
⁶⁾	The IC-R75 only supports the space character, numbers, as well as upper case letters (1^st to 6^th digit only). In addition the driver supports the following characters and converts them (as well as lower case letters) to the associated upper case ASCII-letter (e.g. a or à to A): ß, À, Á, Â, Ã, Ä, Å, à, á, â, ã, ä, å, Ç, ç, È, É, Ê, Ë, è, é, ê, ë', Ì, Í, Î, Ï, ì, í, î, ï, Ñ, ñ, Ò, Ó, Ô, Õ, Ö, ò, ó, ô, õ, ö, Š, š, Ù, Ú, Û, Ü, ù, ú, û, ü, Ý, ý, Ÿ, ÿ, Ž, ž
⁷⁾	The radio supports the whole ASCII character set (and the characters ¥ and ¯ instead of the ASCII characters \ and ~). In addion the driver will convert the following characters to the associated ASCII character (e.g. á to a): ß, À, Á, Â, Ã, Ä, Å, à, á, â, ã, ä, å, Ç, ç, È, É, Ê, Ë, è, é, ê, ë', Ì, Í, Î, Ï, ì, í, î, ï, Ñ, ñ, Ò, Ó, Ô, Õ, Ö, ò, ó, ô, õ, ö, Š, š, Ù, Ú, Û, Ü, ù, ú, û, ü, Ý, ý, Ÿ, ÿ, Ž, ž
⁸⁾	Due to some limitations of the Icom radios regarding resuming a scan operation, the device-internal scanner will only support the following scanner pause modes: "Wait until carrier disappears and resume" and "Stop scanner on first carrier". A timed pause or no pause at all is not supported. However, as most users use the pause mode "Wait until carrier disappears and resume" for almost all scan and search operations anyway, this limitation is practically of no relevance.

Back to general information about the Icom CI-V Device Driver